106 CHAPTER 5: USING NETWORK PROTOCOL COMMANDS
include: Enter to display only the ARP entries that contain the specified character
string "text".
exclude: Enter to display only the ARP entries that do not contain the specified
character string "text".
text Enter a character string. The ARP entries that contain this character string are
displayed.
Description
Use the display arp command to display the ARP mapping table entries by entry
type, or by a specified IP address.
Related commands: arp static, reset arp.
Example
To display all ARP entries in the mapping table, enter the following:
<4500>display arp
Type: S-Static D-Dynamic
IP Address MAC Address VLAN ID Port Name / AL ID Aging Type
161.71.61.20 0012-1212-1213 1 Aggregation Link 1 20 D
--- 1 entry found ---
<4500>
display arp timer aging Syntax
display arp timer aging
View
All views.
Parameter
None.
Description
Use the display arp timer aging command to view the current setting of the
dynamic ARP aging timer.
Example
To display the current setting of the dynamic ARP aging timer, enter the following:
<4500>system-view
Tabl e 10 Output Description of the display arp Command
Field Description
IP Address IP address of the ARP mapping entry
MAC Address MAC address of the ARP mapping entry
VLAN ID/ AL ID VLAN to which the static ARP entry belongs
Port Name Port to which the static ARP entry belongs
Aging Aging time of dynamic ARP entry in minutes
Type Type of ARP entry