3Com 4500 PWR 26-PORT, 4500 PWR 50-PORT, 4500 50-PORT, 4500 26-PORT manual User-interface Syntax

Logging in Commands 39

ip_address: Enter the IP address or the host name of the remote Switch. If you enter the host name, the Switch must be set to static resolution.

service_port: Designates the management port on the remote Switch, in the range 0 to 65535. Optional.

Description

Use the telnet command to log in to another Ethernet switch from the current switch via Telnet for remote management. To terminate the Telnet logon, press <Ctrl+K> or <Ctrl+]>.

If you do not specify a service_port, the default Telnet port number of 23 is used.

Related command: display tcp status.

Example

To log in to the Ethernet switch Switch32 at IP address 10.1.1.1 from the current Switch (Switch01), enter the following:

<4500>system-view

System View: return to User View with Ctrl+Z.

[4500]user-interface vty 0 4

[4500-ui-vty0-4]authentication-mode none <Switch01>telnet 10.1.1.1

Trying 10.1.1.1.....

Press CTRL+K to abort

Connected to 10.1.1.1...

*********************************************************

*	All rights reserved (1997-2004)		*
*	Without the	owner's prior written consent,	*
*no decompiling or		reverse-engineering shall be allowed.*

*********************************************************

user-interface Syntax

user-interface [ type ] first_number [ last_number ]

View

System view

Parameter

type: Enter the user interface type, which can be aux or vty.

first_number: Specifies the number of the first user interface to be configured.

last_number: Specifies the number of the last user interface to be configured.

Description

Using user-interfacecommand, you can enter single user interface view or multiple user interface views to configure the corresponding user interfaces.

Example

To configure the user interfaces with index numbers 0 to 9, enter the following: