3Com 4500 PWR 50-PORT manual Display mac-address Syntax, Interface-nameSpecify the interface name

interface-num:

334CHAPTER 12: USING SYSTEM MANAGEMENT COMMANDS

Description

Use the tftp put command to upload a file from the switch to the specified directory on the TFTP server and save it with a new name.

Related commands: tftp get.

Example

<SW5500>tftp 1.1.3.214 put sw5500cfg.txt temp.txt

MAC Address Table This section describes the commands you can use to manage the MAC Address

ManagementTable on your Switch 4500.

Commands

display mac-address Syntax

display mac-address [ mac-addr[ vlan vlan-id] [ static dynamic blackhole ] [ interface { interface-name interface-typeinterface-num} ] [ vlan vlan-id] [ count ] ]

View

All views

Parameter

mac-addr: Specify the MAC address.

vlan-id: Specify the VLAN ID.

static: Static table entry, lost after resetting switch.

dynamic: Dynamic table entry, which will be aged.

blackhole: Blackhole table entry, the packet with this destination MAC address will be discarded.

interface-type:Specify the interface type. Specify the interface number.

interface-name:Specify the interface name.

For details about the interface-type,interface-num and interface-name parameters, refer to the Port Configuration in this manual.

count: the display information will only contain the number of MAC addresses in the MAC address table if the user enters this parameter when using this command.

Description

Use the display mac-addresscommand to display MAC address table information.