3Com 4500 PWR 50-PORT Related command domain, Level Syntax, Local User View, Local-user Syntax

262CHAPTER 11: USING AAA AND RADIUS COMMANDS

Related command: domain

Example

To enable the user in the current ISP domain, 3Com163.net, to use the idle-cut attribute specified in the user template (that is, enabling the user to use the idle-cut function). The maximum idle time is 50 minutes and the minimum data traffic is 500 bytes.

<4500> system-view

System View: return to User View with Ctrl+Z.

[4500]domain marlboro.net

[4500-isp-marlboro.net]idle-cut enable 50 500

level Syntax

level level

undo level

View

Local User View

Parameter

level: Specifies user priority level, an integer ranging from 0 to 3.

Description

Use the level command to configure user priority level. Use the undo level command to restore the default user priority level.

By default, the user priority level is 0.

Related command: local-user

If the configured authentication mode is none authentication or password authentication, the command level that a user can access after login depends on the priority of user interface. In the case of authentication requiring both username and password, however, the accessible command level depends on user priority level.

Example

To set the priority level of the user 3Com to 3, enter the following:

<4500>system-view

System View: return to User View with Ctrl+Z.

[4500]local-user 3Com1

[4500-luser-3Com1]level 3

local-user Syntax

local-user user-name

undo local-user { user-name all [ service-type { telnet ftp lan-access ssh terminal } ] }