312 CHAPTER 12: USING SYSTEM MANAGEMENT COMMANDS
display startup Syntax
display startup
View
All views
Parameter
None
Description
Use the display startup command, to display the related system software and
configuration filenames used for the current and the next start-ups.
This command is used to display the following information:
■Filename of the system software configured by the user
■Filename of the system software actually used for this startup
■Filename of the system software configured for the next startup
■Configuration filename used for the current startup
■Configuration filename configured for the next startup.
For the related command, see startup saved-configuration.
Example
Display the filenames related to the current and the next enabling.
<4500>display startup
UNIT1:
Startup saved-configuration file: flash:/4500cfg.cfg
Next startup saved-configuration file: flash:/4500cfg.cfg
Bootrom-access enable state: enabled
reset
saved-configuration
Syntax
reset saved-configuration
View
User view
Parameter
None
Description
Use the reset saved-configuration command to erase configuration files from
the flash memory of the Switch.
Consult with technical support personnel before executing this command.