3Com 4500 26-PORT Related command mirrored-to, Display the traffic limit settings, Undo line-rate

QoS Configuration Commands List 193

display qos-interface traffic-limit

Description

Use the display qos-interfacemirrored-tocommand to view the settings of the traffic mirror.

This command is used for displaying the settings of traffic mirror. The information displayed includes the ACL of traffic to be mirrored and the observing port.

Related command: mirrored-to.

Example

To display the settings of traffic mirror, enter the following:

<4500> display qos-interface ethernet1/0/1 mirrored-toEthernet1/0/1: mirrored-to

Inbound:

Matches: Acl 2000 rule 0 running

Mirrored to: monitor interface

Syntax

display qos-interface { interface-name interface-type interface-num unit-id } traffic-limit

View

All views

Parameter

interface-name interface-type interface-num:: Specifices an Interface of the Switch, for more information, refer to the port command in this guide.

unit-id: Unit ID of the Switch.

Description

Use the display qos-interfacetraffic-limitcommand to view the traffic limit settings. If you set the port parameters, the configuration information about the specified port will be displayed. The information displayed includes the ACL of the traffic to be limited, the limited average rate and the settings of some related policing action.

Related commands: traffic-limit.

Example

Display the traffic limit settings.

<4500> display qos-interface ethernet1/0/1 traffic-limitEthernet1/0/1: traffic-limit

Inbound:

Matches: Acl 2000 rule 0 running

Target rate: 128 Kbps

Exceed action: remark-dscp 63

line-rate Syntax

line-ratetarget-rate

undo line-rate