376 CHAPTER 12: USING SYSTEM MANAGEMENT COMMANDS
This command only takes effect on the current terminal where the commands are
input. The debugging/log/trap information can be output to the current terminal,
beginning in user view. When the terminal monitor is shut down, no
debugging/log/trap information will be displayed in local terminal, which is equals
to having performed the undo terminal debugging, undo terminal logging,
undo terminal trapping commands. When the terminal monitor is enabled to use
terminal debugging / undo terminal debugging, terminal logging /
terminal logging and terminal trapping / undo terminal trapping
respectively to enable or disable the corresponding functions.
Example
Disable the terminal monitor.
<SW4500>undo terminal monitor
% Current terminal monitor is off
<SW4500>
terminal trapping Syntax
terminal trapping
undo terminal trapping
View
User view
Parameter
None
Description
Use the terminal trapping command to enable terminal trap information
display. Use the undo terminal trapping command to disable this function.
By default, this function is enabled.
Example
Enable trap information display.
<SW4500>terminal trapping
% Current terminal trapping is on
<SW4500>
SNMP Configuration Commands
This section displays the Simple Network Management Protocol (SNMP)
commands available on your Switch 4500.
display snmp-agent Syntax
display snmp-agent { local-engineid | remote-engineid }
View
All views