3Com 4500 50-PORT, 4500 PWR 50-PORT Flow-control Syntax, Free user-interface Syntax, User view

24CHAPTER 1: USING SYSTEM ACCESS COMMANDS

flow-control Syntax

flow-control { hardware none software }

undo flow-control

View

User interface view

Parameter

hardware: Enter to set hardware flow control.

none: Enter to set no flow control.

software: Enter to set software flow control.

Description

Use the flow-controlcommand to configure the flow control mode on the AUX (Console) port to hardware, software or none. Use the undo flow-controlcommand to restore the default flow control mode (no flow control).

This command can only be performed in the AUX user interface view.

Example

To configure software flow control on the AUX (Console) port, enter the following:

<4500>system-view

System View: return to User View with Ctrl+Z.

[4500]user-interface aux 0

[4500-ui-aux0]flow-control software

free user-interface Syntax

free user-interface { type number }

View

User view

Parameter

type: Enter the type and type number of the user interface to be reset.

number: Enter the index number of the user interface to be reset.

Description

Use this command to reset a specified user interface to its default settings. The user interface will be disconnected after the reset.

Use free user-interfacetype to reset the interface with the specified type and type number to its default settings. Use free user-interfacenumber to reset the interface with the specified index number to its default settings.

You cannot use this command on the current user interface.