3Com 4500 PWR 26-PORT, 4500 50-PORT Display ip routing-table protocol protocol inactive verbose

Routing Table Display Commands 143

display ip routing-table protocol

For detailed information of the output information, refer to Table 18.

Syntax

display ip routing-table protocol protocol [ inactive verbose ]

View

All views

Parameters

protocol Enter one of the following:

■direct Displays the direct connection route information

■static Displays the static route information.

■ospf Displays OSPF route information.

■ospf-aseDisplays OSPF ASE route information.

■ospf-nssaDisplays OSPF NSSA route information.

■rip Displays RIP route information.

inactive Enter to display inactive route information. Without this parameter, the command displays both active and inactive route information. Optional.

verbose Enter to display verbose route information. Without this parameter, the command displays the route summary. Optional.

Description

Use the display ip routing-table protocol command to view the route information for a specified protocol.

Example

To display a summary of all direct connection routes, enter the following:

<4500>display ip routing-table protocol direct

The information displays in the following format:

DIRECT Routing tables:
Summary count: 4
DIRECT Routing tables status:<active>:
Summary count: 3
Destination/Mask	Protocol	Pre	Cost Nexthop		Interface
20.1.1.1/32	DIRECT	0	0	127.0.0.1	InLoopBack0
127.0.0.0/8	DIRECT	0	0	127.0.0.1	InLoopBack0
127.0.0.1/32	DIRECT	0	0	127.0.0.1	InLoopBack0
DIRECT Routing tables status:<inactive>:
Summary count: 1
Destination/Mask	Protocol	Pre	Cost	Nexthop	Interface
210.0.0.1/32	DIRECT	0	0	127.0.0.1	InLoopBack0

To display a summary of all static route information, enter the following:

<4500>display ip routing-table protocol static