3Com 4500 PWR 50-PORT, 4500 PWR 26-PORT, 4500 50-PORT manual VTY user interface view, Quit Syntax

30CHAPTER 1: USING SYSTEM ACCESS COMMANDS

View

VTY user interface view

Parameter

all: Supports both Telnet and SSH protocols.

ssh: Supports only SSH protocol.

telnet: Supports only Telnet protocol.

Description

Use the protocol inbound command to configure the protocols supported by a designated user interface.

By default, the user interface supports Telnet and SSH protocol.

For the related commands, see user-interface vty.

Example

Configure SSH protocol supported by VTY0 user interface.

<4500>system-view

System View: return to User View with Ctrl+Z.

[4500]user-interface vty 0

[4500-ui-vty0]protocol inbound ssh

quit Syntax

quit

View

All views

Parameter

None

Description

Use the quit command to exit from the current view to the next highest view. If the current view is user view, this command quits the system.

There are three levels of view, which are, from high to low:

■user view

■system view

■menu views, for example VLAN view, Ethernet port view, and so on.

Related commands: return, system-view.

Example

To return to user view from system view, enter the following:

[4500]quit

<4500>