American Power Conversion WMR1000B Configuring the Wireless Mobile Router, Browser Configuration

Configuring the Wireless Mobile Router

CONFIGURING THE WIRELESS MOBILE ROUTER

The Wireless Mobile Router can be configured by any Java-supported browser, including Internet Explorer 5.0 or above. Using the web management interface, you can configure the Wireless Mobile Router and view statistics to monitor network activity.

Note: Before attempting to configure the Wireless Mobile Router, and if you have access to the internet, please go to www.apc.com, and download the latest firmware version.

Before attempting to log into the Wireless Mobile Router’s web-based Administration, please verify the following.

1.The browser is configured properly (see below).

2.Any firewall or security software that may be running is disabled.

3.Confirm that the Link LED where the computer is plugged into the Wireless Mobile Router is active. If the Link LED is not lit – try another cable until a good link is established.

Browser Configuration

Confirm the browser is configured for a direct connection to the internet. This is configured through the options/preference section of the browser.

27