American Power Conversion WMR1000B user manual Installation Procedure, Internet

Installation Procedure

Installation Procedure

The Wireless Mobile Router can be positioned at any convenient location in the home or office. No special wiring or cooling requirements are needed. However, APC recommends the following guidelines:

•Keep the Wireless Mobile Router away from heat.

•Do not place the Wireless Mobile Router in a dusty or wet environment.

To install the Wireless Mobile Router (Figure 3), proceed as follows:

1.Connect the Category 6 (CAT6) ethernet cable provided with the Wireless Mobile Router to the LAN/WAN port on the network (providing internet access, e.g., xDSL modem or cable modem) to the WAN connector at the rear of the Router.

Caution: Do not plug a phone jack connector into any RJ-45 port, as this may damage the Router. Instead, use twisted-pair cables having RJ-45 connectors that conform to Federal Communications Commission (FCC) standards.

.

Internet

Internet

Access

DeviceWireless Cable/DSL

Broadband Router

Notebook with

Wireless PC Card

Desktop PC with

Wireless PCI Adapter

Figure 3. Connecting the Wireless Mobile Router

7