American Power Conversion WMR1000B user manual Setting Up TCP/IP

Setting Up TCP/IP

To access the Internet through the Wireless Mobile Router, first configure the network settings of the computers on the LAN to use the same IP subnet as the Wireless Mobile Router. The default network settings for the Wireless Mobile Router are:

Gateway IP Address:	192.168.2.1
Subnet Mask:	255.255.255.0

Note: These settings may be changed to suit individual network requirements, but at least one computer must be configured as described in this section to access the Wireless Mobile Router’s web configuration interface. See “Configuring the Wireless Mobile Router” for information on configuring the Wireless Mobile Router.

If TCP/IP has not previously been configured on the computer, refer to “Configuring Client TCP/IP”.

The IP address of the connected client PC should be 192.168.2.x (where x means 2–254). Set the IP address for client PCs either by automatically obtaining an IP address from the Wireless Mobile Router’s DHCP service, or by manual configuration.

12