American Power Conversion WMR1000B user manual Hardware Description

Installing the Wireless Router

INSTALLING THE WIRELESS ROUTER

Before installing the APC’s Wireless Mobile Router, ensure the items listed under “Package Contents” are available. If any item is missing or damaged, contact the place of purchase or a local APC distributor. Also ensure that all the necessary cabling is in place before installing the Wireless Mobile Router.

Hardware Description

APC’s Wireless Mobile Router can be connected to the internet using a Wide Area Network (WAN) port. Use the WAN port for connection to a 10BASE-T/100BASE-TX ethernet LAN. It can auto-negotiate the operating speed to 10/100 Mbps, and the mode to half/full duplex. This port can be connected directly to a PC or to a server equipped with an ethernet network interface card via a crossover cable, or to a networking device such as an ethernet hub or switch. This WAN port can also be used for a connection to a Digital Suscriber Line (DSL) or cable modem (WAN). Refer to Figure 2 and Table 2 for a description of the two connectors on the Wireless Mobile Router.

Power Connector

WAN Port

Figure 2. Wireless Mobile Router Rear Panel Connectors

4