3Com 4500 26-PORT, 4500 PWR 50-PORT manual Reset lacp statistics Syntax, 4500reset lacp statistics

Ethernet Port Link Aggregation Commands 73

System View: return to User View with Ctrl+Z.

[4500]link-aggregation group 22 mode manual

[4500]interface ethernet 1/0/1

[4500-Ethernet1/0/1]port link-aggregation group 22

#Apr 2 03:29:48:954 2000 4500 LAGG/2/AggPortInactive:- 1 -Trap 1.3.6.1.4.1.2

011.5.25.25.2.2: TrapIndex 31465473 Aggregation Group 22: port member Ethernet1/

0/1 becomes INACTIVE!

[4500-Ethernet1/0/1]

reset lacp statistics Syntax

reset lacp statistics [ interface { interface_type interface_number interface_name } [ to { interface_type interface_num interface_name } ] ]

View

User View

Parameter

interface { interface_type interface_ num interface_name } [ to { interface_type interface_ num interface_name } ]: Specifies ports. You can specify multiple sequential ports with the to parameter, instead of specifying only one port.

interface_name: Specifies port name, in the format of interface_name =

interface_type interface_num.

interface_type: Specifies port type and interface_num port number.

For more information, see the parameter item for the interface command.

Description

Use the reset lacp statistics command to clear LACP statistics at a designated port. If no port is specified, then LACP statistics at all ports shall be cleared.

Related command: display link-aggregation interface.

Example

To clear LACP statistics at all Ethernet ports, enter the following:

<4500>reset lacp statistics