3Com 4500 PWR 26-PORT, 4500 PWR 50-PORT, 4500 50-PORT Enable remote-ping client, Tracert Syntax

Network Connection Test Commands 359

Syntax

remote-ping-agent enable

undo remote-ping-agent enable

Parameters

None

Example

Enable remote-ping client.

[S5500] remote-ping-agent enable

View

This command can be used in the following views:

■System view

Description

You can perform a test only after the remote-ping client function is enabled.

tracert Syntax

tracert [[ -a source-ip] -f first-TTL] [ -m max-TTL] [ -p port ] [

-qnqueries ] [ -wtimeout ] string

View

All views

Parameter

-asource-IP: Configure the source IP address used by tracert command.

-f: Configure to verify the -f switch, first-TTLspecifies an initial TTL, ranging from 0 to the maximum TTL.

-m: Configure to verify the -m switch, max-TTLspecifies a maximum TTL larger than the initial TTL.

-p: Configure to verify the -p switch, port is an integer host port number. Generally, user need not modify this option.

-q: Configure to verify the -q switch, nqueries is an integer specifying the number of query packets sent, larger than 0.

-w: Configure to verify the -w switch, timeout is an integer specifying IP packet timeout in seconds, larger than 0.

string: IP address of the destination host or the hostname of the remote system.