3Com 4500 26-PORT, 4500 PWR 50-PORT, 4500 50-PORT Display ftm Syntax, Display xrn-fabric Syntax

Stack Commands 209

2	00e0-fc03-5502 10	UP/DOWN	2	2/3	3	A
3	00e0-fc04-5502 10	UP/DOWN	2	4/5	3	A
6	00e0-fc05-5502 10	UP/DOWN	2	10/11 3		A
5	00e0-fc06-5502 10	UP/DOWN	2	8/9	3	A
4	00e0-fc07-5502 5	UP/DOWN	2	6/7	3	M
7	00e0-fc04-6502 10	UP/DOWN	2	12/13 3		A
8	00e0-fc01-5502 10	UP/DOWN	2	14/15 5		A

display ftm Syntax

display ftm { information route topology-database }

View

Any view

Parameter

information: Displays the FTM protocol information.

route: Displays the MAC forwarding table of the fabric.

topology-database:Displays the topology database information of the fabric.

Description

Use the display ftm information command to view the FTM protocol information, including DDP status, unit ID, fabric link status, stacking port status and DDp packet statistics.

Use the display ftm route command to view the MAC forwarding table of the fabric, which is stored in the CPU.

Use the display ftm topology-database command to view the topology database information of the fabric.

Example

To display the FTM protocol information of the Switch, enter the following:

[4500]display ftm information

DDP Protocol : disabled

stacking VLAN : NONE

stacking Auth : NONE

display xrn-fabric Syntax

display xrn-fabric [ port ]

View

Any view

Parameter

port: display the stacking port information.

Description

Use the display xrn-fabriccommand to view the information of the entire stack, including unit ID, unit name, operation mode. If the stack information is