3Com 4500 26-PORT manual Rip Syntax, To enable RIP, and enter RIP view, enter the following

RIP Configuration Commands 157

[4500]rip

[4500-rip]reset

rip Syntax

rip

undo rip

View

System view

Parameter

None

Description

Use the rip command to enable RIP and enter the RIP command view. From here, you can configure RIP using the other commands described in this section.

Use the undo rip command to disable RIP. By default, RIP is disabled.

Enabling RIP does not affect interface configurations.

Example

To enable RIP, and enter RIP view, enter the following:

<4500>system-view

System View: return to User View with Ctrl+Z.

[4500]rip

[4500-rip]

rip authentication-mode Syntax

rip authentication-mode { simple password md5 { usual key-string nonstandard key-stringkey-id}}

undo rip authentication-mode

View

Interface View

Parameters

simple Enter to specify simple text authentication mode.

password Enter the simple text authentication key.

md5 Enter to specify MD5 cipher text authentication mode.

usual Enter to specify the MD5 cipher text authentication packet to use the general packet format (RFC1723 standard format).

key-stringEnter the MD5 cipher text authentication key. If it is entered in plain text, the MD5 key is a character string not exceeding 16 characters. This key is displayed in a cipher text form in a length of 24 characters when display