3Com 4500 26-PORT, 4500 PWR 50-PORT Syntax, 4500local-user zbr Luser-zbrservice-type telnet level

Logging in Commands 33

set authentication password

Description

Use the command service-typeto configure which level of command a user can access after login. Use the command undo service-typeto restore the default level of command (level 1).

Commands are classified into four levels, as follows:

■0 - Visit level. Users at this level have access to network diagnosis tools (such as ping and tracert), and the Telnet commands. A user at this level cannot save the configuration file.

■1 - Monitoring level. Users at this level can perform system maintenance, service fault diagnosis, and so on. A user at this level cannot save the configuration file.

■2 - System level. Users at this level can perform service configuration operations, including routing, and can enter commands that affect each network layer. Configuration level commands are used to provide direct network service to the user.

■3 - Management level. Users at this level can perform basic system operations, and can use file system commands, FTP commands, TFTP commands, XModem downloading commands, user management commands and level setting commands.

Example

To allow a user zbr to configure commands a level 0 after login, enter the following:

<4500>system-view

System View: return to User View with Ctrl+Z.

[4500]local-user zbr

[4500-luser-zbr]service-type telnet level 0

To activate these settings, quit the system and login with the username zbr. Now only the commands at level 0 are listed on the terminal.

[4500]quit <4500>?

User view commands:

debugging	Debugging functions
language-mode	Specify the language environment
ping	Ping function
quit	Exit from current command view
super	Privilege current user a specified priority level
telnet	Establish one TELNET connection
tracert	Trace route function
undo	Negate a command or set its default

Syntax

set authentication password { cipher simple } password

undo set authentication password

View

User interface view