3Com 4500 50-PORT manual Details display in the following format, Display port Syntax, Any view

48CHAPTER 2: USING PORT COMMANDS

The details display in the following format:

Port Ethernet1/0/1 loopback-detection is running system Loopback-detection is running Detection interval time is 30 seconds

There is no port existing loopback link

Table 7 Output Description of the Display Loopback-detection Command

Field Description

Port Ethernet1/0/1 loopback-detection is running System Loopback-detection is running Detection interval time is 30 seconds

There is no port existing loopback link

System Loopback-detection is enabled The detection interval is 30 seconds No port is in the loopback state

display port Syntax

display port { hybrid trunk }

View

All views

Parameter

hybrid: Enter to display the hybrid ports.

trunk: Enter to display the trunked ports.

Description

Use the display port hybrid command to view the ports whose link type is hybrid. Use the display port trunk command to view the ports whose link type is trunk.

Example

To display the currently configured hybrid ports, enter the following:

<4500>display port hybrid

The details display in the following format:

The following hybrid ports exist:

Ethernet1/0/1 Ethernet1/0/2

This example indicates that the current configuration has two hybrid ports, Ethernet1/0/1 and Ethernet1/0/2.

display unit Syntax

display unit unit-idinterface

View

Any view

Parameter

unit-id:Specifies Unit ID, ranging from 1 to 8.