3Com 4500 26-PORT manual Idle-cut Syntax, ISP Domain View, Idle-cut disable enable minute flow

AAA and RADIUS Configuration Commands 261

For a Switch, each supplicant belongs to an ISP domain. The system supports up to 16 ISP domains. If a user has not reported its ISP domain name, the system will put it into the default domain.

When this command is used, if the specified ISP domain does not exist, the system will create a new ISP domain. All the ISP domains are in the active state when they are created.

Related commands: access-limit,radius scheme, state, display domain.

Example

To create a new ISP domain, marlboro.net, and enters its view, enter the following:

<4500>system-view

System View: return to User View with Ctrl+Z.

[4500]domain marlboro.net

New Domain added.

[4500-isp-marlboro.net]

idle-cut Syntax

idle-cut { disable enable minute flow }

View

ISP Domain View

Parameter

disable: means disabling the user to use idle-cut function .

enable: means enabling the user to use the function.

minute: Specifies the maximum idle time, ranging from 1 to 120 and measured in minutes.

flow: The minimum data traffic, ranging from 1 to 10,240,000 and measured in bytes.

Description

Use the idle-cutcommand to configure the user template in the current ISP domain.

By default, after an ISP domain is created, this attribute in user template is disable, that is, the user idle-cut is disabled.

The user template is a set of default user attributes. If a user requesting for the network service does not have some required attributes, the corresponding attributes in the template will be endeavored to him as default ones. The user template of the Switch you are using may only provide user idle-cut settings. After a user is authenticated, if the idle-cut is configured to enable or disable by neither the user nor the RADIUS server, the user will adopt the idle-cut state in the template.

Because a user template only works in one ISP domain, it is necessary to configure user template attributes for users from different ISP domain respectively.