IP Routing Policy Configuration Commands 167
Example
Display the information of the address prefix list named to p1.
<4500>display ip ip-prefix p1
name index conditions ip-prefix / mask GE LE
p1 10 permit 10.1.0.0/16 17 18
display route-policy Syntax
display route-policy [ route_policy_name ]
View
All views
Parameter
route_policy_name Specify displayed Route-policy name.
Description
Use the display route-policy command to view the configured Route-policy
Related command: route-policy.
Example
Display the information of Route-policy named as policy1.
<4500>display route-policy policy1
Route-policy : policy1
Permit 10 : if-match (prefixlist) p1
apply cost 100
matched : 0 denied : 0
Tabl e 23 Output Description of the display ip-ip prefix Command
Field Description
name Name of ip-prefix
index Internal sequence number of ip-prefix
conditions Mode: permit or deny
ip-prefix Address and network segment length of ip-prefix
GE Greater-equal value of ip-prefix network segment length
LE Less-equal value of ip-prefix network segment length
Tabl e 24 Output Description of the display route-policy Command
Field Description
Route-policy Name of ip-prefix
Permit 10 Information of the route-policy with mode as permit and node as 10:
■if-match (prefixlist) p1 — The configured if-match clause
■apply cost 100 — Apply routing cost 100 to the routes matching the
conditions defined by if-match clause
■matched — Number of routes matchng the conditions set by if-match
clause
■denied — Number of routes not matching the conditions set by if-match
clause