3Com 4500 26-PORT, 4500 PWR 50-PORT, 4500 PWR 26-PORT, 4500 50-PORT manual Port hybrid vlan Syntax

Ethernet Port Configuration Commands 57

Description

Use the port hybrid pvid vlan command to configure the default VLAN ID of the hybrid port. Use the undo port hybrid pvid command to restore the default VLAN ID of the hybrid port.

Hybrid port can be configured together with the isolate-user-vlan. But if the default VLAN has set mapping in the isolate-user-vlan, the default VLAN ID cannot be modified. If you want to modify it, cancel the mapping first.

The default VLAN ID of local hybrid port must be consistent with that of the peer one, otherwise, the packets cannot be properly transmitted.

Related command: port link-type.

Example

To configure the default VLAN of the hybrid port Ethernet1/0/1 to VLAN100, enter the following.

<4500>system-view

System View: return to User View with Ctrl+Z.

[4500]interface ethernet 1/0/1

[4500-Ethernet1/0/1]port link-type hybrid

[4500-Ethernet1/0/1]port hybrid pvid vlan 100

[4500-Ethernet1/0/1]

port hybrid vlan Syntax

port hybrid vlan vlan_id_list { tagged untagged }

undo port hybrid vlan vlan_id_list

View

Ethernet Port View

Parameter

vlan_id_list: Enter a VLAN ID, or more than one VLAN ID, in the range 2 to 4094. The hybrid port will be added to the specified VLANs. This can be a single VLAN, a series of individual VLANs separated by a space, or the first VLAN in a range of VLANs (vlan_id to last_vlan_id).

You can enter up to ten vlan_id parameters in one port hybrid vlan command.

tagged: Enter to tag the port for the specified VLAN.

untagged: Enter to leave the port untagged for the specified VLAN.

Description

Use the port hybrid vlan command to add the port to the specified VLAN(s). The port needs to have been made a hybrid port before you can do this. See the related command below. Use the undo port hybrid vlan command to remove the port from the specified VLAN(s).