3Com 4500 PWR 50-PORT, 4500 PWR 26-PORT, 4500 50-PORT, 4500 26-PORT Display stop-accounting-buffer

274CHAPTER 11: USING AAA AND RADIUS COMMANDS

PKT auth timeout ,Num=0 ,Err=0 ,Succ=0

display stop-accounting-buffer

Syntax

display stop-accounting-buffer { radius-scheme radius-scheme-name session-id session-id time-range start-timestop-time user-name user-name}

View

All views

Parameter

radius-schemeradius-scheme-name:Configures to display the saved stopping accounting requests according to RADIUS server name. radius-scheme-namespecifies the RADIUS server name with a character string not exceeding 32 characters.

session-idsession-id:Configures to display the saved stopping accounting requests according to the session ID. session-idspecifies the session ID with a character string not exceeding 50 characters.

time-rangestart-timestop-time:Configures to display the saved stopping accounting requests according to the saving time. Start-timespecifies the start time of the saving time range and stop-timespecifies the stop time of the saving time range. The time is expressed in the format hh:mm:ss-yyyy/mm/dd. When this parameter is specified, all the stopping accounting requests saved in the time range since start-timeto stop-timewill be displayed.

user-nameuser-name:Configures to display the saved stopping accounting requests according to the username. User-namespecifies the username, a character string not exceeding 32 characters.

Description

Use the display stop-accounting-buffercommand to view the stopping accounting requests, which have not been responded and saved in the buffer.

After transmitting the stopping accounting requests, if there is no response from the RADIUS server, the Switch will save the packet in the buffer and retransmit it for several times, which is set through the retry realtime-accounting.

This command is used to display the stopping accounting requests saved in the Switch buffer. You can select to display the packets sent to a certain RADIUS server, or display the packets according to user session ID or username. You may also display the request packets saved during a specified time range. The displayed packet information can help with diagnosis and troubleshooting.

Related commands: reset stop-accounting-buffer,stop-accounting-buffer enable, retry stop-accounting.

Example

To display the stopping accounting requests saved in the system buffer since 0:0:0 to 23:59:59 on August 31, 2002, enter the following: