3Com 4500 PWR 50-PORT manual Accounting optional Syntax, Selection of Radius accounting option

270CHAPTER 11: USING AAA AND RADIUS COMMANDS

	[4500]domain marlboro.net
	[4500-isp-marlboro.net]state block
	[4500-isp-marlboro.net]quit
	To set the user 3Com1 to be in the block state, enter the following:
	[4500-user-3Com1]state block
RADIUS Protocol	This section describes how to use the RADIUS Protocol configuration commands
Configuration	on your Switch.
Commands
accounting optional	Syntax
	accounting optional
	undo accounting optional
	View
	ISP Domain View
	Parameter
	None
	Description
	Use the accounting optional command to enable the selection of the RADIUS
	accounting option. Use the undo accounting optional command to disable the
	selection of RADIUS accounting option.
	By default, selection of the RADIUS accounting option is disabled.
	If no RADIUS server is available or if RADIUS accounting server fails when the
	accounting optional is configured, the user can still use the network resource,
	otherwise, the user will be disconnected.
	The user configured with accounting optional command in RADIUS scheme will
	no longer send real-time accounting update packet or stop accounting packet.
	The accounting optional command in RADIUS Scheme View is only effective on
	the accounting that uses this RADIUS scheme.
	Example
	Enable the selection of RADIUS accounting of the RADIUS scheme named as
	CAMS.
	<4500>system-view
	System View: return to User View with Ctrl+Z.
	[4500]radius scheme cams
	New Radius scheme
	[4500-radius-cams]accounting optional
data-flow-format	Syntax

data-flow-format data { byte giga-byte kilo-byte mega-byte } packet { giga-packet kilo-packet mega-packet one-packet }