3Com 4500 PWR 26-PORT, 4500 PWR 50-PORT Related command display dot1x, Dot1x dhcp-launch Syntax

802.1x Configuration Commands 239

forwarding to the RADIUS server. You can use EAP authentication in one of the four sub-methods: PEAP, EAP-TLS, EAP-TTLS and EAP-MD5.

To use PAP, CHAP or EAP authentication, RADIUS server should support PAP, CHAP or EAP authentication respectively.

Related command: display dot1x.

Example

Configure 802.1x user to use PAP authentication

<4500>system-view

System View: return to User View with Ctrl-Z

[4500]dot1x authentication-method pap

dot1x dhcp-launch Syntax

dot1x dhcp-launch

undo dot1x dhcp-launch

View

System View

Parameter

None

Description

Use the dot1x dhcp-launchcommand to set 802.1x to prevent the Switch from triggering user ID authentication for users who configure static IP addresses in a DHCP environment. Use the undo dot1x dhcp-launchcommand to allow the Switch to trigger ID authentication.

By default, the Switch can trigger user ID authentication for users who configure static IP addresses in a DHCP environment.

Related command: dot1x.

Example

Prevent the Switch from triggering the authentication ID for users who configure static IP addresses in a DHCP environment.

<4500>system-view

System View: return to User View with Ctrl-Z

[4500]dot1x dhcp-launch

dot1x max-user Syntax

dot1x max-user user-number[ interface interface-list]

undo dot1x max-user [ interface interface-list]

View

Ethernet Port View