3Com 4500 PWR 26-PORT Port trunk permit vlan Syntax, All Enter to add the trunk port to all VLANs

Ethernet Port Configuration Commands 59

[4500]interface ethernet 1/0/1

[4500-Ethernet1/0/1]port link-type trunk

[4500-Ethernet1/0/1]

port trunk permit vlan Syntax

port trunk permit vlan {vlan_id_list all}

undo port trunk permit vlan {vlan_id_list all}

View

Ethernet port view

Parameter

vlan_id: Enter a VLAN ID, or more than one VLAN ID, in the range 2 to 4094. The trunk port will be added to the specified VLANs. This can be a single VLAN, a series of individual VLANs separated by a space, or the first VLAN in a range of VLANs. If this is the first VLAN in a range use the last_vlan_id parameter to indicate the last VLAN in the range (vlan_id to last_vlan_id).

You can enter up to ten vlan_id parameters at one port trunk permit vlan command.

all: Enter to add the trunk port to all VLANs.

Description

Use the port trunk permit vlan command to add a trunk port to one VLAN, a selection of VLANs or all VLANs. Use the undo port trunk permit vlan command to remove a trunk port from one VLAN, a selection of VLANs or all VLANs.

A trunk port can belong to multiple VLANs. If the port trunk permit vlan command is used many times, then the VLAN enabled to pass on trunk port is the set of these vlan_id_list.

Related command: port link-type.

Example

To add the trunk port Ethernet1/0/1 to VLAN 2, VLAN 4 and all VLANs in the range

50-100, enter the following:

<4500>system-view

System View: return to User View with Ctrl+Z.

[4500]interface ethernet 1/0/1

[4500-Ethernet1/0/1]portlink-type trunk

[4500-Ethernet1/0/1]port trunk permit vlan 2 4 50 to 100

Please wait... Done.

[4500-Ethernet1/0/1]

port trunk pvid vlan Syntax

port trunk pvid vlan vlan_id

undo port trunk pvid