Ethernet Port Configuration Commands 43
Ethernet Port Configuration Commands
This section describes the commands you can use to configure and manage the
ports on your Switch 4500.
copy configuration Syntax
copy configuration source { interface-type interface_number |
interface_name | aggregation-group agg-id } destination {
interface_list [ aggregation-group agg-id ] | aggregation-group
agg-id }
View
System View
Parameter
interface_type: Source port type.
interface_num: Source port number.
interface_name: Source port name, in the format of interface_name =
interface_type interface_num. For more information, see the parameter item for
the interface command.
interface_list: Destination port list, interface_list1 = { interface_type
interface_num | interface_name } [ to { interface_type interface_num |
interface_name } ] &<1-10>. &<1-10> indicates that the former parameter can
be input 10 times repeatedly at most.
agg-id: Source or destination aggregation group ID. If it is a source aggregation
group, the port with minimum port number is the source port; if it is a destination
aggregation group, the configurations of all its member ports change to be
consistent with that of the source.
Description
Use the copy configuration command to copy the configuration of a specific
port to other ports, to ensure consistent configuration.
Example
Copy the configuration of aggregation group 1 to aggregation group 2.
<4500>system-view
System View: return to User View with Ctrl+Z.
[4500]copy configuration source ethernet 1/0/1 destination ethernet
1/0/2
Copying VLAN configuration...
Copying LACP configuration...
Copying QOS configuration...
Copying STP configuration...
Copying speed/duplex configuration...
[4500]
broadcast-suppression Syntax
broadcast-suppression { ratio | pps pps }