SETTING UP
Plastic grass catcher assembly
∙Refer to the “Set Up Instructions” attached to the grass catcher lower half.
Grass Catcher 
Upper Half
Grass Catcher
Lower Half
Figure 1. Grass Catcher—Assembled
Engine oil
Oil must be added before attempting to start the engine otherwise damage to the engine will occur.
Refer to the engine owner’s manual.
The 4 stroke engine fitted to the lawnmower is shipped with no oil in the sump.
Engine fuel
Refer to the engine owner’s manual.
Use only fresh unleaded fuel in the lawnmower engine.
OPERATION - All mowers
Adjusting the cut height– refer figure 2.
WARNING
When selecting the cut height stand to the rear of the machine with your feet well clear of the cutting blades.
(2) (1)
The lawnmower 13 height settings are controlled by the height adjustment lever located at the rear right hand wheel.
∙Grasp the height adjustment lever (1) and pull the lever away from the base to disengage the lever from the height adjustment rack (2).
∙Move the lever either forwards or backwards to the desired position and release the lever so as to engage in the height adjustment rack.
Figure 2. Height adjustment
3
