3Com 4500 50-PORT Switch, Display dot1x Syntax, Information and relevant statistics information

236CHAPTER 11: USING AAA AND RADIUS COMMANDS

802.1x Configuration	This section describes how to use the 802.1x configuration commands on your
Commands	Switch 4500.
display dot1x	Syntax
	display dot1x [ sessions statistics [ interface interface-list]]
	View
	All views
	Parameter
	interface: Displays the 802.1x information on the specified interface.
	sessions: Displays the session connection information of 802.1x.
	statistics: Displays the relevant statistics information of 802.1x.
	interface-list:Ethernet interface list including several Ethernet interfaces,
	expressed in the format interface-list = { interface-num [ to
	interface-num] } & < 1-10 >. interface-numspecifies a single Ethernet
	interface in the format interface-num = { interface-type interface-num
	interface-name}, where interface-typespecifies the interface type,
	interface-numspecifies the interface number and interface-namespecifies the
	interface name. For the respective meanings and value ranges, refer to
	“Parameter” in “Using Port Commands”.
	Description
	Use the display dot1x command to view the relevant information of 802.1x,
	including configuration information, running state (session connection
	information) and relevant statistics information.
	By default, all the relevant 802.1x information about each interface will be
	displayed.
	This command can be used to display the following information on the specified
	interface: 802.1x configuration, state or statistics. If no port is specified when
	executing this command, the system will display all 802.1x related information.
	For example, 802.1x configuration of all ports, 802.1x session connection
	information, and 802.1x data statistical information. The output information of
	this command can help the user to verify the current 802.1x configurations so as
	to troubleshoot 802.1x.
	Related commands: reset dot1x statistics, dot1x, dot1x retry, dot1x
	max-user,dot1x port-control,dot1x port-method,dot1x timer.
	Example
	Display the configuration information of 802.1x.
	<4500>display dot1x
	Equipment 802.1X protocol is enabled
	DHCP-launch is disabled
	EAP-relay is enabled
	Proxy trap checker is disabled
	Proxy logoff checker is disabled