3Com 4500 PWR 26-PORT, 4500 PWR 50-PORT manual Display ftp-server Syntax, Display ftp-user Syntax

FTP Server Configuration Commands 315

	Parameter
	cfgfile: The name of the configuration file. It is a string with a length of 5 to 56
	characters.
	Description
	Use the startup saved-configurationcommand to configure the configuration
	file used for enabling the system for the next time.
	The configuration file must have ".cfg" as its extension name and must be saved
	under the root directory of the Flash.
	For the related command, please see display startup
	Example
	Configure the configuration file for the next start-up.
	<4500>startup saved-configuration 4500cfg.cfg
	Please wait............Done!
	<4500>
	%Apr 2 01:24:57:661 2000 3Com CFM/3/CFM_LOG:- 1 -Unit1 set the
	configuration successfully.
FTP Server	This section describes how to use the File Transfer Protocol (FTP) configuration
Configuration	commands on your Switch 4500.
Commands
display ftp-server	Syntax
	display ftp-server
	View
	All views
	Parameter
	None
	Description
	Use the display ftp-servercommand to display the parameters of the current
	FTP Server. You can perform this command to verify the configuration after setting
	FTP parameters.
	Example
	Display the configuration of FTP Server parameters.
	<4500>display ftp-server
	Ftp server is running
	Max user number	1
	User count	0
	Timeout(minute)	30
	<4500>
display ftp-user	Syntax

display ftp-user