172 CHAPTER 6: USING ROUTING PROTOCOL COMMANDS
route-policy Syntax
route-policy route_policy_name { permit | deny } node { node_number }
undo route-policy route_policy_name [ permit | deny | node
node_number ]
View
System view
Parameter
route_policy_name Enter the Route-policy name to identify one Route-policy
uniquely.
permit Enter to specify the match mode of the defined Route-policy node as
permit mode.
deny Enter to specify the match mode of the defined Route-policy node as deny
mode.
node Enter the node of the route policy.
node_number Enter the index of the node in the route-policy. When this
route-policy is used for routing information filtration, the node with smaller
node-number will be tested first.
Description
Use the route-policy command to create and enter the Route-policy view.
Use the undo route-policy command to delete the established Route-policy.
By default, no Route-policy is defined.
The route-policy command is used for route information filtration or route
policy. One Route-policy comprises some nodes and each node comprises some
match and apply sub-statements. The match sub-statement defines the match
rules of this node and the apply sub-statement defines the actions after passing
the filtration of this node. The filtering relationship between the match
sub-statements of the node is “and”, that is, all match sub-statements that meet
the node. The filtering relation between Route-policy nodes is "OR", i.e. passing
the filtering of one node means passing the filtering of this Route-policy. If the
information does not pass the filtration of any nodes, it cannot pass the filtration
of this Route-policy.
Related commands: if-match interface, if-match acl, if-match ip-prefix,
if-match ip next-hop, if-match cost, apply cost.
Example
Configured one Route-policy policy1, whose node number is 10 and if-match
mode is permit, and enter Route policy view.
<4500>system-view
System View: return to User View with Ctrl+Z.
[4500]route-policy policy permit node 10
% New sequence of this list