3Com 4500 PWR 50-PORT, 4500 PWR 26-PORT, 4500 50-PORT, 4500 26-PORT Timer response-timeout Syntax

290CHAPTER 11: USING AAA AND RADIUS COMMANDS

Parameter

minutes: Real-time accounting interval, ranging from 3 to 60, measured in minutes in multiples of 3. By default, the value is 12.

Description

Use the timer realtime-accountingcommand to configure the real-time accounting interval. Use the undo timer realtime-accountingcommand to restore the default interval.

To implement real-time accounting, it is necessary to set a real-time accounting interval. After the attribute is set, NAS will transmit the accounting information of online users to the RADIUS server regularly.

The value of minutes is related to the performance of NAS and RADIUS server. The smaller the value is, the higher the requirement for NAS and RADIUS server is. When there are a large amount of users (more than 1000, inclusive), we suggest a larger value. The following table recommends the ratio of minutes value to number of users.

Table 31 Recommended ratio of minutes to number of users

Number of users	Real-time accounting
	interval (minute)
1 to 99	3
100 to 499	6
500 to 999	12
>1000	>15

Related commands: retry realtime-accounting,radius scheme.

Example

To set the real-time accounting interval of RADIUS scheme, “3Com”, to 15 minutes, enter the following:

<4500>system-view

System View: return to User View with Ctrl+Z.

[4500]radius scheme 3Com

[4500-radius-3Com]timer realtime-accounting 15

timer response-timeout Syntax

timer response-timeout seconds

undo timer response-timeout

View

RADIUS Scheme View

Parameter

seconds: RADIUS server response timeout timer, ranging from 1 to 10 seconds. By default, the value is 3.