PICTURESOUNDDISPLAY
10
19
19
69
69
68
10
77
68
18
6
6
6
5
6
68
71
No picture.
!Press and hold STOP and PLAY on the unit at the same time for more than
5 seconds. The function is switched to half-picture (INTERLACE).
Television reception worsens
when the unit is connected.
î
You may need to use a signal amplifier.
Check the antenna connection and the alignment of your antenna.
The TV picture format is not
set correctly.
îCheck the [TV Aspect] setting in the Connection Setup menu.
No on-screen messages. îChange the [On-Screen Messages] setting the Display Setup menu.
No sound. Distorted sound.
Volume set to quiet.
îCheck the connections.
îIf you connected an amplifier, check the input mode.
îSwitch off the V.S.S. function if it causes problems.
It is not possible to hear the
desired sound type.
!Press AUDIO to select the desired sound type.
!Change the appropriate setting in the Sound Setup menu.
The sound cannot be set for
stereo or NICAM broadcasts.
îConnect external units with audio cables even if you use a digital connection.
îYou can change the sound type when using DVD-RAM or HDD.
There is picture interference.
îThe sound cannot be switched on some discs.
îCheck the connection to the TV, e.g. AV1.
îThe [TV System] setting does not match that on the disc.
!In STOP mode, press and hold STOP and OPEN/CLOSE on the unit for more
than 5 seconds. This switches the unit from PAL to NTSC or vice versa.
If you need help
No functions. îAn incorrect remote control code was selected.
îCheck the batteries.
îPoint the remote control at the sensor on the unit.
îChild protection has been activated.
The TV cannot be operated. îAn incorrect remote control code was selected.
îNo time. Set the time in the Others [Clock] Setup menu.
The display light is weak. îChange the [FL Display] setting in the Display Setup menu.
"0:00" blinks on the unit display.
îThe PROGRESSIVE output is activated, but the connected TV is not
progressive-capable.
Page
REMOTE CONTROL
Poor picture in spite
of good signal quality.
îOvermodulation makes the signal strength display go to red.
!Readjust the picture with your room aerial until the picture quality improves.
64
76
79