Panasonic DMR-EX95V manual Component Video OUT terminal, Progressive television picture

COMPONENT VIDEO OUT

TV

COMPONENT

VIDEO IN

Audioinput L/R

Y PB PR

Video cable

Audio cable	Y	- Green
	PB - Blue
L - White	PR - Red
R - Red
AV OUT
COMPONENT VIDEO OUT	Y
S VIDEO OUT	PB
AUDIO OUT	PR

COMPONENT VIDEO OUT terminal

The terminals can be used for INTERLACE or PROGRESSIVE output and deliver a clearer picture than the S VIDEO OUT terminal.

Connections via these terminals output the colour difference signals (PB/PR) and the brightness signal (Y) separately.

Colours can be reproduced true to the original colour.

The properties of the COMPONENT VIDEO input terminal are dependent on the TV or screen.

!Connect the COMPONENT VIDEO OUT sockets of the unit with the COMPONENT VIDEO IN of the TV unit. Use a Video cable.

!Always connect terminals with the same colour.

!Connect the audio cables to the corresponding audio input terminal on the TV.

Setup	TV Aspect		4:3
Tuning	Progressive		On
	TV System		PAL
Disc
	HDMI Settings
Picture			Video
Sound	AV1 Output
Display	AV2 Settings
Connection	Ac	AV1 Output
VHS	Video ( with component )
Others
	RGB 1 ( without component )
	RGB 2 ( without component )
	RGB output is available all the
	time while this unit is on.
Setup	TV Aspect		4:3
Tuning	Progressive		On
	TV System		PAL
Disc
	HDMI Settings
Picture			Video
Sound	AV1 Output
Display	AV2 Settings
Connection	Active Antenna		Off
VHS		SELECT	TAB
Others
		ENTER	RETURN

Connecting a TV with COMPONENT VIDEO input terminals

If your TV with LCD or plasma screen supports the progressive process, connect it to the COMPONENT VIDEO OUT terminal.

If you want to enjoy full progressive video, set Progressive to [On].

If the AV1 Output setting in the Setup menu is set to [RGB 1/2 ( without component )],

there is no output to the COMPONENT VIDEO OUT terminal.
Set this option to [Video ( with component )].
If the unit is connected to the TV via the S VIDEO OUT or the AV1 terminal,	69
output is Interlace regardless of the settings.

!Press FUNCTIONS.

!	Select [To Others] with	and confirm with ENTER.
!	Select [Setup] with and confirm with ENTER.
!	Select [Connection] with	, [Progressive] with , and confirm with ENTER.
!	Select the option [On] with	and confirm with ENTER.

!Press RETURN several times, in order to return to the television picture.

Progressive television picture

The progressive picture aspect ratio (height to width) is set to 16:9. DVD-Video with a picture aspect ratio of 16:9 is properly displayed. However, video material with an image page ratio of 4:3 is shown stretched from right to left. If it is possible to adjust the picture aspect ratio on your television, select the setting [Progressive - On].

With a normal television, the progressive output can cause the picture to flicker,

even if the television is progressive-compatible.				69
Select the setting [Progressive - Off].
Progressive-compatible televisions (PAL)
LCD/plasma television or LCD projector			Conventional televisions
If progressive output is used, videos can be viewed			On a normal television, Progressive output can
in High Resolution, for example from DVD-Video.			cause flickering even if the television is
COMPONENT VIDEO OUT on this unit is			Progressive-compatible. Select the [Progressive
connected with the COMPONENT VIDEO IN on the			- Off] setting.
television. Select the [Progressive - On] setting.
COMPONENT			COMPONENT
VIDEO OUT			VIDEO OUT
COMPONENT VIDEO OUT	Y		Y
			COMPONENT VIDEO OUT
	PB		PB
	PR		PR
	Progressive output	COMPONENT	Progressive output	COMPONENT
DVD Recorder			DVD Recorder
		VIDEO IN		VIDEO IN

19