Elmo p10 instruction manual English, Signal allocation

ENGLISH

rConnecting to the unit having the analog RGB output terminal

Connect the analog RGB cable to the [RGB IN] terminal on the rear panel.

•Specifications of the analog RGB input terminal of this product

Signal allocation

5	4	3	2	1
					Video signal :	Analog 0.7V(p-p) 75Ω terminated
10	9	8	7	6	Horizontal synchronized signal : TTL level (Positive/negative polarity)
15	14	13	12	11	Vertical synchronized signal :	TTL level (Positive/negative polarity)
DSUB 15P shrink terminal (Female)

Pin assignment

Pin No.	Name	Pin No.	Name	Pin No.	Name
1	Video signal (Red)	6	GND (Red)	11	GND
2	Video signal (Green)	7	GND (Green)	12	N.C
3	Video signal (Blue)	8	GND (Blue)	13	Horizontal synchronized signal
4	N.C	9	N.C	14	Vertical synchronized signal
5	GND	10	GND	15	N.C

tConnecting to the unit having the composite vide input terminal

Connect the video cable with RCA pin plug to the [VIDEO OUT] terminal on the rear panel.

yConnecting to the unit having S-video input terminal

Connect the S-video cable to the [S-VIDEO OUT] terminal on the rear panel. If the unit to be connected has a Y/C-separated connector, a conversion adapter is required.

SETTING UP

76