Elmo p10 instruction manual 6 RS-232CSPECIFICATIONS, Cable Connection, Setting Up, English

ENGLISH

6 RS-232C SPECIFICATIONS

This product can be controlled from a PC connected to this product through the RS-232C terminal [RS-232C].

Setting Up

qConnect this product to a PC with an RS-232C cable.

When using an RS-232C cable available on the market, make sure that pin connections are the same as below.

To protect this product and the PC, be sure to turn OFF the power supply to all units before starting the connection work.

wStart the PC, and set the communication mode of the RS-232C to the communication mode of this product.

For the information how to set the communication mode of the RS-232C, refer to the instruction manual of the PC.

eStart the PC program to operate this product.

rControl through the RS-232C will start.

For communication control, be sure to take the above steps for settings.

Cable Connection

			This product side
				(DSUB-9P)
DSUB-9P (Female)					CD	1
5	4	3	2	1	RXD	2
					TXD	3
					DTR	4
					SG	5
					DSR	6
9		8	7	6	RTS	7
					CTS	8
					RI (CI)	9

PC side (DSUB-9P)

1	CD	PC side:
		DSUB-9P (Female)
2	RXD
		5	4	3	2	1
3	TXD

4DTR

5SG

6DSR

7RTS

8	CTS	9 8 7 6
9	RI

ABOUT RS-232C

96