HP OpenView Storage B6960-96008 Using Another Device, Restoring Using the Data Protector GUI

Integrating SAP R/3 and Data Protector

Restoring an SAP R/3 Database

See the SAP R/3 System Online Documentation for instructions on how to use the sapdba or brrestore utilities.

Using Another Device

Data Protector supports restore using a device other than the one that was used at backup time.

Restoring Using the Data Protector GUI

If you are performing a restore using the Data Protector GUI, see the online Help index “selecting, devices for restore” for more information on how to perform a restore using another device.

	Restoring Using the Data Protector CLI or SAP R/3 Commands
	If you are performing a restore using the Data Protector CLI or SAP R/3
	commands, specify the new device in the
	/etc/opt/omni/server/cell/restoredev (UNIX systems) or
	<Data_Protector_home>\Config\server\Cell\restoredev
	(Windows systems) file in the following format:
	"DEV 1" "DEV 2"
	where
	DEV 1 is the original device and DEV 2 is a new device.
	Note that this file should be deleted after it is used. On Windows, it has
	to be in UNICODE format.
Example	Suppose you have SAP R/3 objects backed up on a device called DAT1. To
	restore them from a device named DAT2, specify the following in the
	restoredev file:
	"DAT1" "DAT2"

Disaster Recovery

Disaster recovery is a very complex process that involves products from several vendors. As such, successful disaster recovery depends on all the vendors involved. The information provided here is intended to be used as a guideline.

Chapter 2 209