HP OpenView Storage B6960-96008 manual Backup Problems on Unix Systems

Integrating Oracle and Data Protector

Troubleshooting

Figure 1-25Checking the Inet Start-Up Parameters:

5.Examine the system errors

The system errors are reported in the

<Data_Protector_home>\log\debug.log file on the Oracle Server system.

Backup Problems on UNIX Systems

At this stage, you should have performed all the verification steps described in the previous sections. After this, proceed as follows:

1.Check your Oracle Server configuration

To check the configuration, log in to the Oracle server system as the user root or as the Oracle user that is identified as described in “Configuring Oracle Users on UNIX and OpenVMS” on page 21. The identified Oracle user and the user root must also be added to Data Protector admin or operator group. Then check the configuration as described in “Checking the Configuration” on page 33.

2.Verify Data Protector internal data transfer using the testbar2 utility

Before you run the testbar2 utility, verify that the Cell Manager name is correctly defined on the Oracle Server system. Check the

/etc/opt/omni/client/cell_server (HP-UX and Solaris systems)

Chapter 1 129