Integrating SAP R/3 and Data Protector

Troubleshooting

2.Verify Data Protector internal data transfer using the testbar2 utility.

Before you run the testbar2 utility, verify that the Cell Manager name is correctly defined on the SAP R/3 Database Server. Check the

<Data_Protector_home>\Config\client\cell_server file, which contains the name of the Cell Manager system. Then run the following command:

<Data_Protector_home>\bin\testbar2 -type:SAP

-appname:<ORACLE_SID> -bar:<backup_specification_name>-perform:backup

Examine the errors reported by the testbar2 utility by clicking the Details button in the Data Protector Monitor context.

If the messages indicate problems concerning the Data Protector side of the integration, create an SAP R/3 backup specification to back up to a nul or file device. If the backup succeeds, the problem may be related to the backup devices.

Refer to the HP OpenView Storage Data Protector Troubleshooting Guide for instructions on troubleshooting devices.

If the test fails again, call support.

3.Verify the backup using backint export OB2BARLIST=<barlist_name> export OB2APPNAME=<ORACLE_SID>

<Data_Protector_home>\bin\backint.exe -f backup -t file -u <ORACLE_SID> -i <input_file>

where <input_file> is a file with a list of full pathnames for backup. Backint anticipates a list of files in the following format: <pathName_1>

<pathName_2> <pathName_3>

Chapter 2

221