HP OpenView Storage B6960-96008 manual Backup Objects

Integrating SAP R/3 and Data Protector

Configuring an SAP R/3 Backup

	BRBACKUP command options. For
	example, type -t online, for online
	backup.
	Or, type -u<user_name> for some
	other user than default user (usually
	the user system).
Backup Objects	When the backup specification is
	saved, this field lists the string
	passed by omnisap.exe to the
	BRBACKUP command.
BR Archive	Enter the BRARCHIVE command
	options. See the SAP R/3 Online
	Documentation for information about
	BRARCHIVE command options.
Balancing: By Load	Groups files in subsets by size so that
	the amount of data on all backup
	devices is approximately the same.
	Each subset is backed up by one Data
	Protector sapback program, thus
	allowing concurrent backup of all
	subsets.
	If this option is set and your backup
	device uses hardware compression,
	the size of the backed up file on the
	medium will not be the same as on
	the disk. To make Data Protector
	aware of this, make sure that you
	specify the size of the backed up file
	on the medium in the compression
	section of the Data Protector SAP R/3
	configuration file. See “Data
	Protector SAP R/3 Configuration
	File” on page 158 for information on
	how to do this.
Balancing: By Time	Groups files in subsets so that backup
	to all backup devices takes
	approximately the same time. This
	depends on the file types, the speed of
	the backup devices, and external

Chapter 2 187