HP OpenView Storage B6960-96008 manual Creating a Data Protector SAP R/3 Backup Specification, 180

Integrating SAP R/3 and Data Protector

Configuring an SAP R/3 Backup

Creating a Data Protector SAP R/3 Backup Specification

To create an SAP R/3 backup specification, proceed as follows:

1.In the HP OpenView Storage Data Protector Manager, switch to the Backup context.

2.In the Scoping Pane, expand Backup, and then Backup Specifications. Right-click SAP R/3 and then click Add Backup. The Create New Backup dialog box is displayed.

3.In the Create New Backup dialog box, double-click Blank SAP Backup to create a backup specification without predefined options, or use one of the pre-defined templates given below:

Brarchive_CopyDeleteSave	Creates a second copy of the
	offline redo logs, saves them,
	deletes them after the backup,
	and then archives the
	newly-created redo logs.
Brarchive_Save	Backs up the offline redo logs.
Brarchive_SaveDelete	Backs up the offline redo logs, and
	then deletes them after the
	backup.
Brarchive_SecondCopyDelete	Creates a second copy of the
	offline redo logs that have been
	already archived, and then deletes
	them after the backup.
Brbackup_Offline	Backs up the shut-down database
	using backint.
Brbackup_Online	Backs up the active database. The
	util_file device type is used for
	backup. All tablespaces are in
	backup mode (locked) for the
	duration of the whole backup
	session. Whole database,
	particular tablespace or datafile
	can be backed up using this
	template.
Brbackup_Util_File_Online	Backs up the active database.

180 Chapter 2