HP OpenView Storage B6960-96008 manual Starting a Backup Using the GUI, 200

Integrating SAP R/3 and Data Protector

Backing Up an SAP R/3 Database

Figure 2-14Scheduling Backups

Click OK and then Apply to save the changes.

NOTE It is not possible to perform an incremental backup in the backint mode.

Starting a Backup Using the GUI

Running an Interactive Backup

An interactive backup can be performed any time after a backup specification has been created and saved.

To start an interactive backup of an SAP R/3 database using the Data Protector GUI, proceed as follows:

1.In the HP OpenView Storage Data Protector Manager, switch to the Backup context.

2.In the Scoping Pane, expand Backup, Backup Specifications, and then SAP R/3.

3.Right-click the backup specification and select Start Backup.

200 Chapter 2