HP OpenView Storage B6960-96008 manual Configuring Users

Integrating SAP DB/MaxDB and Data Protector

Configuring the Integration

Configuring the Integration

It is assumed that the installation of Data Protector software components on the SAP DB/MaxDB Server system was successful.

Configuration	To run or schedule Data Protector SAP DB/MaxDB integration backups
Overview	the following task must be performed:
	• An SAP DB/MaxDB user with certain permissions must be added to
	the Data Protector admin group. See “Configuring Users” on
	page 263.
	• Backup devices, media, and media pools must be configured. Refer to
	Data Protector online Help for information on how to do this.
	• The SAP DB/MaxDB instance to be backed up must, as a part of the
	Data Protector backup specification creation, be configured to be used
	with Data Protector. See “Configuring an SAP DB/MaxDB Backup”
	on page 264.
	• A Data Protector SAP DB/MaxDB integration backup specification
	must be created. See “Configuring an SAP DB/MaxDB Backup” on
	page 264.
	SAP DB/MaxDB instance can be reconfigured once it has been
	configured to be used with Data Protector. See “Modifying the
	Configuration of an SAP DB/MaxDB Instance in Data Protector” on
	page 272.

Configuring Users

To perform a backup, restore, or other operation on an SAP DB/MaxDB Server, an SAP DB/MaxDB user granted specific SAP DB/MaxDB permissions must be configured on the SAP DB/MaxDB Server and an OS user must be added to Data Protector admin group. Follow the steps below to do this:

1. On the SAP DB/MaxDB Server, create or identify an SAP DB/MaxDB user with at least the following SAP DB/MaxDB permissions:

• Backup

• Recovery

Chapter 3 263