HP OpenView Storage B6960-96008 manual Monitoring an SAP R/3 Backup and Restore, 212

Integrating SAP R/3 and Data Protector

Monitoring an SAP R/3 Backup and Restore

	Monitoring an SAP R/3 Backup and Restore
	The Data Protector GUI enables you to monitor current or previous
	backup and restore sessions.
NOTE	Only the Data Protector users in the Admin group and those granted the
	Monitor user rights are given access to the Data Protector monitoring
	functionality.
	Monitoring is automatically activated when you start a restore or
	backup.
	Monitoring Current Sessions
	During a backup, system messages are sent to both the SAP R/3
	Database Server and the Data Protector monitor. Thus, you can monitor
	a backup session from either the SAP R/3 Database Server or from any
	Data Protector client in the network where the User Interface is
	installed.
	When it is detected that no more data can be backed up on the media,
	either because they are not in a device or because they are full, and a
	mount prompt is issued, the message is sent to the Data Protector
	monitor only, not to SAP R/3. Change the media and confirm the mount
	prompt in Data Protector.
	To monitor a currently running session using the Data Protector GUI,
	proceed as follows:
	1. In the Context List, click Monitor.
	In the Results Area, all currently running sessions are listed.
	2. Double-click the session you want to monitor.

Clearing Sessions To remove all completed or aborted sessions from the Results Area of the Monitor context, proceed as follows:

1. In the Scoping Pane, click Current Sessions.

212 Chapter 2