HP OpenView Storage B6960-96008 manual 302

Integrating SAP DB/MaxDB and Data Protector

Restoring an SAP DB/MaxDB Database

	Create SAP DB/MaxDB media in an SAP DB/MaxDB media group.
	Execute the following command for every medium to be created:
	medium_put <media_group_name>/<medium_name> <pipe_name>
	<media_type> <backup_type>
	Where <backup_type> can be one of the following:
	• DATA for full backup
	• PAGES for differential (diff) backup
	• LOG for transactional (trans) backup
IMPORTANT	When creating SAP DB/MaxDB media and pipes for the purpose of a
	Data Protector backup and restore, the media group name must begin
	with the “BACK” string. The commands below create two media and two
	pipes (parallelism = 2) in a media group:
Windows	medium_put BACKDP-Data[2]/1 \
	\\.\Pipe\<inst_name>.BACKDP_Data[2].1 PIPE DATA
	medium_put BACKDP-Data[2]/2 \
	\\.\Pipe\<inst_name>.BACKDP_Data[2].2 PIPE DATA
UNIX	medium_put BACKDP-Data[2]/1 \
	/var/opt/omni/tmp/<inst_name>.BACKDP_Data[2].1 PIPE
	DATA
	medium_put BACKDP-Data[2]/2 \
	/var/opt/omni/tmp/<inst_name>.BACKDP_Data[2].2 PIPE
	DATA
	6. Start the SAP DB/MaxDB utility session by executing the following
	command:
	util_connect
	7. Start the restore from a Data Protector backup session by executing
	the following command:
	recover_start <media_group_name> <backup_type> EBID
	"<inst_name> <SessionID>:1 <pipe_name1>,<inst_name>
	<SessionID>:2 <pipe_name2>[, ...]"

302 Chapter 3