American Standard 605XTMV Unpacking, Roughing-inDimensions, TOOLS REQUIRED Fig, 4-1/4, 1-3/16

All American Standard Faucets Are Water Tested At Our Factory. Some Residual Water May Remain In The Faucet During Shipping.

Fig. 1

Roughing-in Dimensions

MOUNTING	4-1/4"		5"
HOLES	(108mm)	(126mm)

1-3/16"	3-3/8"
	(85mm)
(46mm)

Thermostatic Mixing valve	20"
	(508mm)
• 3/8" stainless steel compression flex
hoses, 20" length
• meets ASSE 1016
• anti-scald protection

3-3/16" (33mm)

TOOLS REQUIRED; Fig. 2

1Channel Locks

2Adjustable Wrench

3Phillips Screwdriver

4Flat Blade Screwdriver

5Electric Drill & 1/4" Drill Bit

6Tape Measure

Fig. 2

12

3

6 5

4

10'

Thank you for selecting American-Standard...the benchmark of fine quality for over 100 years. To ensure that your installation proceeds smoothly--please read these instructions carefully before you begin.

UNPACKING

1.Remove the Mixer and loose items from the carton. The picture below shows the Mixer and all loose items after the carton has been opened.

1.Electronics Mixing Valve and Enclosure

2.Supply Hoses

3.Mounting Kit

4.Installations instructions 3

2	1			4
		Instructions	SELECTRONIC™
			Thermostatic Mixing Valve
			605XTMV
		Installation	M968808	Specifications	1
				Installation	2
				Adjust Temperature	3
				Service	3
				Replacement Parts	4
			Certified to comply with ASME A112.18.1M	FAQ,s	5
			© 2005 American Standard

NOTE TO INSTALLER: Please give this manual to the customer after installation.

To learn more about American Standard Faucets visit our website at: www.us.amstd.com or U.S.

customer's e-mail us at: faucetsupport@amstd.com

For Parts, Service, Warranty or other Assistance,

please call 1-800-442-1902 (In Canada: 1-800-387-0369)

(In Toronto Area only: 1-905-3061093)

1