Kenmore 630.1395 Canceling Cycle Changing, Countdown Display, Cycle Completion Signal, Indicator

Canceling		a cycle	Changing	a cycle
*	Open	the door slightly to stop the cycle.	If you need	to change the running cycle to a new cycle,

*Wait for a few seconds before opening the door all the follow the instructions below:

way.

Open

the

door

slightly

to

stop the

cycle.

*

Hold

down

the

"POTS

& PANS" and "CHINA GENTLE"

*

Before

opening door

all

the way,

wait a few

seconds

button

until

the

display

shows "0".

for

water

to drain

to

the

base

of

dishwasher

tub.

*Close the door. The dishwasher will drain any remaining * Press both the "POTS & PANS" and "CHINA GENTLE"

water.			buttons to	reset.	The display			shows	"0"
		*	Press the	POWER		button	to	turn the	unit off. Now turn
ADDITIONAL	FEATURES		unit on again.
Countdown	Display	*	Select new cycles			and options.
The countdown	display indicates the time remaining for a	*	Close the	door	to	begin	cycle.
cycle to complete. The time will change based on water
temperatures	and control settings.

Cycle Completion Signal

The cycle completion signal alerts you when a cycle completes and the dishwasher has washed and dried the dishes. You can choose to disable the tone or adiust the volume.

NOTE: The unit must be powered OFF before activating/ deactivating.

To activate or deactivate:

*Press and hold the "CHINA GENTLE" button and the "POWER" button simultaneously.

*When the light on the "CHINA GENTLE" button you are pressing illuminates and a tone is heard, release both buttons.

*Press the "CHINA GENTLE" button until you achieve the desired volume or until there is no tone (to turn off).

*Press the "POWER" button to save the setting.

Dry Assist

With this option you can raise the temperature of the rinse water and increase the drying time for improved

drying.

To use this feature:

*Select the desired cycle first.

*Then press the "DRY ASSIST" button.

*Close the door to begin the cycle.

Time Assist

Reduces the amount of time it takes to complete a cycle while maintaining a high performance level.

To use this feature:

*Select the desired cycle first.

*Then press the "TIME ASSIST" button.

*Close the door to begin the cycle.

INDICATOR LIGHTS

Sanitized indicator

When the "Sanitized" symbol illuminates on the control panel, it means that the items that were just washed have been sanitized according to the requirements of the National Sanitation Foundation (NSF). For more information on NSF certification, refer to the Dishwasher Cycles and Options section of this manual. (The indicator light will come on for the cycles marked with an asterisk in the cycles and options table)

Refill Rinse Agent Indicator 4_

The symbol shown above will illuminate to alert you when mare rinse agent is required.

_ indicator

If this symbol illuminates it usually means that unit is not getting water. Please check your water supply valve located behind the dishwasher.

SmartLight

Blue LED illuminates the floor to indicate that the dishwasher is running.

You could be seriously scalded if you allow hot water to splash out of the dishwasher. OPEN THE DOOR CAREFULLY during any wash or rinse cycle. Do not fully open the door until water noises have stopped.

15