How to assemble
1. Connect hose
insert hose end with cord into opening of cleaner, lining up largest projection on hose with largest notch of opening. Turn hose to the right to tighten.
To disconnect, depress latch, and turn hose to the left.
2.Attach wands, tools and nozzle
To attach hose to extension wand or tool, turn plastic latch ring on hand grip until outer slot lines up with inner slot.
Push hand grip down onto wand or tool so that button projection fits into slot. Turn latch ring to lock in place. Attach second wand and nozzle or tools in the same manner. Reverse procedure to remove wand, tool or nozzle.
Rug and floor nozzle
The combination rug and floor nozzle has been designed to do an efficient cleaning job on both carpet and hard surface floors.
Hard surface floors
Lock brushes to clean bare floors by sliding indicator to BARE FLOOR.
R u g s
Release brushes to clean rugs or carpet by sliding indicator to RUG.
5
