Secondary filter
How to clean
Disconnect cleaner from electri- cal outlet.
The secondary filter protects the motor from dirt particles. If the filter becomes dirty, either clean or replace it.
The secondary filter is located inside the cleaner behind the paper bag. To remove filter, first remove cover of cleaner, then lift out filter. Clean filter by rinsing it in water. When dry, slide filter back into position.
Do not operate cleaner without the secondary filter in place.
Rug and floor node
To maintain cleaning effectiveness of your rug and floor nozzle, the brushes may need to be replaced occasionally.
See your nearest Hoover factory Service Center or Authorized Warranty Service Dealer for new brushes.
Lubrication
The motor is equipped with two bearings that contain sufficient lubrication for the life of the motor. Addition of lubricant could cause damage. Therefore, do not add lubricant to either motor bearing.
